Portasaw ® PS1411
 |
|
 |
|
| |
| Portasaw ® PS1411 |
| Engine/Motor |
| Engine Manufacturer |
Baldor Electric Motor |
| Engine Spec |
T.E.F.C. |
| Max. Horsepower |
1.5 HP |
| Fuel Capacity |
- l. / - gal. |
| Oil Capacity |
- l. / - pt. |
| Air Filter |
- |
| Starter |
Capacitor |
| Engine Coolant |
air |
| Voltage |
115/208230V |
| Cycles |
60/AC/1 Hz |
| Full Load |
17.2/9.58.6A |
| Starting |
92@115VA |
| Transmission
Data |
| Wheels, front |
- mm / - inch |
| Conveyor Cart |
Cast aluminium. vulcanized rubber
top. adjustble measureing rule. 45/90deg cutting guide |
| Water Pump |
High output submersible. totally
epoxy sealed with builtin thermal overload protection |
| Chassis |
- |
| Weight, Crated |
77 kg / 171 lbs |
| Weight, Uncrated |
72 kg / 160 lbs |
| Blade
Data |
| Blade Guard Capacity |
356 mm / 14 inch |
| Blade Shaft RPM |
2509 |
| Max Depth of Cut |
127 mm / 5 inch |
| Arbor Size |
25.4 mm / 1 inch |
| Blade Shaft Bearings |
Ball bearings |
| Blade Shaft Drive |
2V-belts |
| Blade Guard Attachment |
One-piece steel. sta-Level |
| Blade Coolant |
- |
| Blade Control |
- |
| Features |
| Distributor
Info |
| Distributor Discount |
E |
|
|
|
|
- Only two pivot points for reduced saw maintenance
and longer diamond blade life.
- Cutting head pivots on bearings which are sealed and lubricated for life.
- Bearings are seated in a machined saddle, on a heavy-duty support, for
precise alignment that lasts.
- Quick-mount cutting head allows easy removal of the power head for
transportation.
- The bearing colar folds down, so the entire cutting head assembly can be
lifted of easily.
- Revomable handles make transportation easy.
- Fixed head - simply position the head to the desired height, then tighten
the lock handle. Material can then be pushed toward the blade.
- Plunge cut - hold the handle and lower the blade into the material.
- With the use of the optional foot pedal kit, the operator can use their
foot to lower the blade into the material.
- The "X" braced steel frame resists flexing.
- Open throat design for clear passage of large material.
- Powder coat painted for protection against scratches, rust and corrosion.
- Provide extended blade life and reduces maintenance.
- Blade flanges are precision-machined for secure clamping of the blade.
- A standard blade shaft wrench is included.
- Field installable blade shaft assembly reduces downtime when replacement
is needed.
- Folding stand is strong, yet lightweight and lets operator set up the saw
anywhere at a convenient working height.
- Foot pedal kit has a 10-gauge tread plate pedal that attaches to steel
stand to provide hands-free cutting.
- Skid kit attaches to bottom of stand for greater stability and balance
with rubberized feet at each end.
- Two power selections: Gas or electric options available. Choose from 1-1/2
HP, 2 HP or 3 HP electric motor or 3 and 5-1/2 HP gas engine.
- Patented sta-level® blade guardkeeps the blade guard parallel to the
cutting table for accurate cuts. Spring tension counter-balances the cutting
head and the cutting head height can be adjusted with a convenient lock
handle located on the counter- balance arm or with the optional foot pedal
kit. The ergonomically designed steel handle with molded grip bolts securely
into place.
- Large conveyor cart is a durable cast aluminum cart for strength and
rigidity with moveable rip guide for making precision cuts. Vulcanized
rubber top is permanently bonded to the cart. Non-corosive metal wheel will
not deform or nick for long life and accurate cuts with lower maintenance.
- Removeable/replaceable carrying handles. |
| |
Portasaw ® PS1411
 |
|
 |
|
| |
| Portasaw ® PS1411 |
| Engine/Motor |
| Engine Manufacturer |
Baldor Electric Motor |
| Engine Spec |
T.E.F.C. |
| Max. Horsepower |
1.5 HP |
| Fuel Capacity |
- l. / - gal. |
| Oil Capacity |
- l. / - pt. |
| Air Filter |
- |
| Starter |
Capacitor |
| Engine Coolant |
air |
| Voltage |
115/208230V |
| Cycles |
60/AC/1 Hz |
| Full Load |
17.2/9.58.6A |
| Starting |
92@115VA |
| Transmission
Data |
| Wheels, front |
- mm / - inch |
| Conveyor Cart |
Cast aluminium. vulcanized rubber
top. adjustble measureing rule. 45/90deg cutting guide |
| Water Pump |
High output submersible. totally
epoxy sealed with builtin thermal overload protection |
| Chassis |
- |
| Weight, Crated |
77 kg / 171 lbs |
| Weight, Uncrated |
72 kg / 160 lbs |
| Blade
Data |
| Blade Guard Capacity |
356 mm / 14 inch |
| Blade Shaft RPM |
2509 |
| Max Depth of Cut |
127 mm / 5 inch |
| Arbor Size |
25.4 mm / 1 inch |
| Blade Shaft Bearings |
Ball bearings |
| Blade Shaft Drive |
2V-belts |
| Blade Guard Attachment |
One-piece steel. sta-Level |
| Blade Coolant |
- |
| Blade Control |
- |
| Features |
| Distributor
Info |
| Distributor Discount |
E |
|
|
|
|
- Only two pivot points for reduced saw maintenance
and longer diamond blade life.
- Cutting head pivots on bearings which are sealed and lubricated for life.
- Bearings are seated in a machined saddle, on a heavy-duty support, for
precise alignment that lasts.
- Quick-mount cutting head allows easy removal of the power head for
transportation.
- The bearing colar folds down, so the entire cutting head assembly can be
lifted of easily.
- Revomable handles make transportation easy.
- Fixed head - simply position the head to the desired height, then tighten
the lock handle. Material can then be pushed toward the blade.
- Plunge cut - hold the handle and lower the blade into the material.
- With the use of the optional foot pedal kit, the operator can use their
foot to lower the blade into the material.
- The "X" braced steel frame resists flexing.
- Open throat design for clear passage of large material.
- Powder coat painted for protection against scratches, rust and corrosion.
- Provide extended blade life and reduces maintenance.
- Blade flanges are precision-machined for secure clamping of the blade.
- A standard blade shaft wrench is included.
- Field installable blade shaft assembly reduces downtime when replacement
is needed.
- Folding stand is strong, yet lightweight and lets operator set up the saw
anywhere at a convenient working height.
- Foot pedal kit has a 10-gauge tread plate pedal that attaches to steel
stand to provide hands-free cutting.
- Skid kit attaches to bottom of stand for greater stability and balance
with rubberized feet at each end.
- Two power selections: Gas or electric options available. Choose from 1-1/2
HP, 2 HP or 3 HP electric motor or 3 and 5-1/2 HP gas engine.
- Patented sta-level® blade guardkeeps the blade guard parallel to the
cutting table for accurate cuts. Spring tension counter-balances the cutting
head and the cutting head height can be adjusted with a convenient lock
handle located on the counter- balance arm or with the optional foot pedal
kit. The ergonomically designed steel handle with molded grip bolts securely
into place.
- Large conveyor cart is a durable cast aluminum cart for strength and
rigidity with moveable rip guide for making precision cuts. Vulcanized
rubber top is permanently bonded to the cart. Non-corosive metal wheel will
not deform or nick for long life and accurate cuts with lower maintenance.
- Removeable/replaceable carrying handles. |
|