The Partner K950 Ring Saw is a completely new saw that is just as handy, maneuverable and versatile as an ordinary gas-powered saw. You can quickly and easily cut through 10" walls, ceilings and floors from one side. Since the widest part of the cutting blade is inside the material, over cutting in the corners can practically be eliminated. The result is more efficient work with cleaner cuts and fewer touch ups. Another advantage, there is less digging when cutting around pipes that are lying in trenches. To sum it up, Partner’s new K950 Ring Saw opens up new possibilities for applications that cannot be done with a standard gas-powered saw and you can double your capacity. Partner's patented drive principle Our experience of the ring saw principle is long and unique, this helped us improve the design over the years. The blade is guided by and runs on four rollers at the outside edge of the blade. Two engagement rollers fit into a groove on the side of the blade and force the blade, under spring tension, forward in the drive wheel. The drive wheel is powered by the gas engine. The V shaped groove in the wheel drives the inside rim of the blade much like a pulley drives a V-belt. The other two rollers (support rollers) hold the blade in place from the other side.
 

Read more about the Partner K950 Ring Saw Click Here

1. Demolition work
2. Heavy concrete cutting
3. Deep concrete cutting
4. Indoor/Refurbish work
5. Masonry work
6. Gas/water/sewer maintenance
7. Dismantling work (auto, ship, airplane etc.)
8. Pipeline cutting
    

With the new Partner K 950 Concrete Chain Saw., Partner’s saw range gains a versatile and efficient machine that can solve new cutting problems in a variety of applications. The Partner K 950 Chain is a gas powered saw with a diamond chain. The K 950 Chain is based on the popular K950 Active, and it features all the technical and ergonomic benefits of that machine. With a concrete chainsaw you can cut better in tight spots, you get better control while avoiding gyro forces, you can cut sharp corners without over cutting and you can make up to 15" (390 mm) cuts from one side. This makes the concrete chainsaw a perfect complement to a Ring Saw with a blade, where the Ring Saw does the pre-cutting. Reliable technology with unique new possibilities
The Partner K950 Chain is a handy, versatile and easy-to-use cutter, that is just as convenient to move around as an ordinary gas powered saw. But with completely new possibilities and applications. For instance, it’s easy to cut through 15" (390 mm) thick walls, ceilings and floors from one side, you can also make square openings as small as 11 by 11 cm. By using a concrete chainsaw, the work gets done more efficiently, with cleaner cuts and less finishing up.
 

Read more about the Partner K950 Concrete Chain Saw Click Here

1. Demolition work
2. Heavy concrete cutting
3. Deep concrete cutting
4. Demanding precision cutting
5. Stone, monument work
    
6. General concrete cutting
    
7. Dismantling work (auto, ship, airplane etc.)
8. Pipeline cutting
9. Pipe cutting
10. Corner cutting
     

 The Partner K950 Ring Saw is a completely new saw that is just as handy, maneuverable and versatile as an ordinary gas-powered saw. You can quickly and easily cut through 10" walls, ceilings and floors from one side. Since the widest part of the cutting blade is inside the material, over cutting in the corners can practically be eliminated. The result is more efficient work with cleaner cuts and fewer touch ups. Another advantage, there is less digging when cutting around pipes that are lying in trenches. To sum it up, Partner’s new K950 Ring Saw opens up new possibilities for applications that cannot be done with a standard gas-powered saw and you can double your capacity. Partner's patented drive principle Our experience of the ring saw principle is long and unique, this helped us improve the design over the years. The blade is guided by and runs on four rollers at the outside edge of the blade. Two engagement rollers fit into a groove on the side of the blade and force the blade, under spring tension, forward in the drive wheel. The drive wheel is powered by the gas engine. The V shaped groove in the wheel drives the inside rim of the blade much like a pulley drives a V-belt. The other two rollers (support rollers) hold the blade in place from the other side.
 

Read more about the Partner K950 Ring Saw Click Here

1. Demolition work
2. Heavy concrete cutting
3. Deep concrete cutting
4. Indoor/Refurbish work
5. Masonry work
6. Gas/water/sewer maintenance
7. Dismantling work (auto, ship, airplane etc.)
8. Pipeline cutting
    

With the new Partner K 950 Concrete Chain Saw., Partner’s saw range gains a versatile and efficient machine that can solve new cutting problems in a variety of applications. The Partner K 950 Chain is a gas powered saw with a diamond chain. The K 950 Chain is based on the popular K950 Active, and it features all the technical and ergonomic benefits of that machine. With a concrete chainsaw you can cut better in tight spots, you get better control while avoiding gyro forces, you can cut sharp corners without over cutting and you can make up to 15" (390 mm) cuts from one side. This makes the concrete chainsaw a perfect complement to a Ring Saw with a blade, where the Ring Saw does the pre-cutting. Reliable technology with unique new possibilities
The Partner K950 Chain is a handy, versatile and easy-to-use cutter, that is just as convenient to move around as an ordinary gas powered saw. But with completely new possibilities and applications. For instance, it’s easy to cut through 15" (390 mm) thick walls, ceilings and floors from one side, you can also make square openings as small as 11 by 11 cm. By using a concrete chainsaw, the work gets done more efficiently, with cleaner cuts and less finishing up.
 

Read more about the Partner K950 Concrete Chain Saw Click Here

1. Demolition work
2. Heavy concrete cutting
3. Deep concrete cutting
4. Demanding precision cutting
5. Stone, monument work
    
6. General concrete cutting
    
7. Dismantling work (auto, ship, airplane etc.)
8. Pipeline cutting
9. Pipe cutting
10. Corner cutting
     

 The Partner K950 Ring Saw is a completely new saw that is just as handy, maneuverable and versatile as an ordinary gas-powered saw. You can quickly and easily cut through 10" walls, ceilings and floors from one side. Since the widest part of the cutting blade is inside the material, over cutting in the corners can practically be eliminated. The result is more efficient work with cleaner cuts and fewer touch ups. Another advantage, there is less digging when cutting around pipes that are lying in trenches. To sum it up, Partner’s new K950 Ring Saw opens up new possibilities for applications that cannot be done with a standard gas-powered saw and you can double your capacity. Partner's patented drive principle Our experience of the ring saw principle is long and unique, this helped us improve the design over the years. The blade is guided by and runs on four rollers at the outside edge of the blade. Two engagement rollers fit into a groove on the side of the blade and force the blade, under spring tension, forward in the drive wheel. The drive wheel is powered by the gas engine. The V shaped groove in the wheel drives the inside rim of the blade much like a pulley drives a V-belt. The other two rollers (support rollers) hold the blade in place from the other side.
 

Read more about the Partner K950 Ring Saw Click Here

1. Demolition work
2. Heavy concrete cutting
3. Deep concrete cutting
4. Indoor/Refurbish work
5. Masonry work
6. Gas/water/sewer maintenance
7. Dismantling work (auto, ship, airplane etc.)
8. Pipeline cutting
    

With the new Partner K 950 Concrete Chain Saw., Partner’s saw range gains a versatile and efficient machine that can solve new cutting problems in a variety of applications. The Partner K 950 Chain is a gas powered saw with a diamond chain. The K 950 Chain is based on the popular K950 Active, and it features all the technical and ergonomic benefits of that machine. With a concrete chainsaw you can cut better in tight spots, you get better control while avoiding gyro forces, you can cut sharp corners without over cutting and you can make up to 15" (390 mm) cuts from one side. This makes the concrete chainsaw a perfect complement to a Ring Saw with a blade, where the Ring Saw does the pre-cutting. Reliable technology with unique new possibilities
The Partner K950 Chain is a handy, versatile and easy-to-use cutter, that is just as convenient to move around as an ordinary gas powered saw. But with completely new possibilities and applications. For instance, it’s easy to cut through 15" (390 mm) thick walls, ceilings and floors from one side, you can also make square openings as small as 11 by 11 cm. By using a concrete chainsaw, the work gets done more efficiently, with cleaner cuts and less finishing up.
 

Read more about the Partner K950 Concrete Chain Saw Click Here

1. Demolition work
2. Heavy concrete cutting
3. Deep concrete cutting
4. Demanding precision cutting
5. Stone, monument work
    
6. General concrete cutting
    
7. Dismantling work (auto, ship, airplane etc.)
8. Pipeline cutting
9. Pipe cutting
10. Corner cutting
     

 The Partner K950 Ring Saw is a completely new saw that is just as handy, maneuverable and versatile as an ordinary gas-powered saw. You can quickly and easily cut through 10" walls, ceilings and floors from one side. Since the widest part of the cutting blade is inside the material, over cutting in the corners can practically be eliminated. The result is more efficient work with cleaner cuts and fewer touch ups. Another advantage, there is less digging when cutting around pipes that are lying in trenches. To sum it up, Partner’s new K950 Ring Saw opens up new possibilities for applications that cannot be done with a standard gas-powered saw and you can double your capacity. Partner's patented drive principle Our experience of the ring saw principle is long and unique, this helped us improve the design over the years. The blade is guided by and runs on four rollers at the outside edge of the blade. Two engagement rollers fit into a groove on the side of the blade and force the blade, under spring tension, forward in the drive wheel. The drive wheel is powered by the gas engine. The V shaped groove in the wheel drives the inside rim of the blade much like a pulley drives a V-belt. The other two rollers (support rollers) hold the blade in place from the other side.
 

Read more about the Partner K950 Ring Saw Click Here

1. Demolition work
2. Heavy concrete cutting
3. Deep concrete cutting
4. Indoor/Refurbish work
5. Masonry work
6. Gas/water/sewer maintenance
7. Dismantling work (auto, ship, airplane etc.)
8. Pipeline cutting
    

With the new Partner K 950 Concrete Chain Saw., Partner’s saw range gains a versatile and efficient machine that can solve new cutting problems in a variety of applications. The Partner K 950 Chain is a gas powered saw with a diamond chain. The K 950 Chain is based on the popular K950 Active, and it features all the technical and ergonomic benefits of that machine. With a concrete chainsaw you can cut better in tight spots, you get better control while avoiding gyro forces, you can cut sharp corners without over cutting and you can make up to 15" (390 mm) cuts from one side. This makes the concrete chainsaw a perfect complement to a Ring Saw with a blade, where the Ring Saw does the pre-cutting. Reliable technology with unique new possibilities
The Partner K950 Chain is a handy, versatile and easy-to-use cutter, that is just as convenient to move around as an ordinary gas powered saw. But with completely new possibilities and applications. For instance, it’s easy to cut through 15" (390 mm) thick walls, ceilings and floors from one side, you can also make square openings as small as 11 by 11 cm. By using a concrete chainsaw, the work gets done more efficiently, with cleaner cuts and less finishing up.
 

Read more about the Partner K950 Concrete Chain Saw Click Here

1. Demolition work
2. Heavy concrete cutting
3. Deep concrete cutting
4. Demanding precision cutting
5. Stone, monument work
    
6. General concrete cutting
    
7. Dismantling work (auto, ship, airplane etc.)
8. Pipeline cutting
9. Pipe cutting
10. Corner cutting