|
Check-Out
Masonry Saws by Husqvarna / Target are the best
heavy duty masonry saws on the market. Looking for a masonry saw? Husqvarna / Target was the pioneer
of mason saws. Target masonry saws are for brick, block, pavers, and mason
products. Husqvarna / Target line of GM masonry saws range from heavy duty 3 horsepower
electric or 13 horsepower gas models. See Parts Bottom Of Page.
| Engine Manufacturer |
Baldor |
| Engine Spec |
T.E.F.C. |
| Horsepower |
3 - 5 HP |
| Starter |
Capacitor |
| Voltage |
208-230V |
| Phases |
1 |
| Cycles |
60/AC/1HZ |
| Full Load |
14.5A/13A |
| Starting |
188/95A |
| Blade Shaft RPM |
3090 |
| Blade Capacity |
14" |
| Max Depth of Cut |
5" |
| Arbor Size |
1" |
| Blade Shaft Bearings |
Ball Bearings |
| Blade Shaft Drive |
2V-Belts |
|
Husqvarna / Target
14" Electric Masonry Brick and Block Saws
 |
Husqvarna Guardmatic ® 14" Masonry Saws
Dual capacitor increases power efficiency and reduces run amperage,
making it an ideal machine for low voltage conditions. Electric motors
operate on a run and start capacitor. Cutting head pivot on bearings
which are sealed and lubricated for life - no greasing required!
Bearings are seated in a machined saddle, on a heavy-duty support, for
precise alignment that lasts.
Cutting head height can be controlled with a convenient crank control
and foot pedal.
Rips=Capable of 8"x8"x16" in Block , Diagonal Cut=N/A in,
Depth of Cut 5".
Read more about Guardmatic |
Check-Out |
| Engine Manufacturer |
Baldor |
| Engine Spec |
T.E.F.C. |
| Horsepower |
3 - 7 HP |
| Starter |
Capacitor |
| Voltage |
208-230V |
| Phases |
1 |
| Cycles |
60/AC/1HZ |
| Full Load |
14.5A/13A |
| Starting |
188/95A |
| Blade Shaft RPM |
3090 |
| Blade Capacity |
20" |
| Max Depth of Cut |
5" |
| Arbor Size |
1" |
| Blade Shaft Bearings |
Ball Bearings |
| Blade Shaft Drive |
2V-Belts |
|
Husqvarna / Target
20" Electric Masonry Brick and Block Saws
|
|
Husqvarna Guardmatic ® 20" Masonry Saws
Dual capacitor increases power efficiency and reduces run amperage,
making it an ideal machine for low voltage conditions. Electric motors
operate on a run and start capacitor. Cutting head pivot on bearings
which are sealed and lubricated for life - no greasing required!
Bearings are seated in a machined saddle, on a heavy-duty support, for
precise alignment that lasts.
Cutting head height can be controlled with a convenient crank control
and foot pedal.
|
Check-Out |
| |
Check-Out
Masonry Saws by Husqvarna / Target are the best
heavy duty masonry saws on the market. Looking for a masonry saw? Husqvarna / Target was the pioneer
of mason saws. Target masonry saws are for brick, block, pavers, and mason
products. Husqvarna / Target line of GM masonry saws range from heavy duty 3 horsepower
electric or 13 horsepower gas models. See Parts Bottom Of Page.
| Engine Manufacturer |
Baldor |
| Engine Spec |
T.E.F.C. |
| Horsepower |
3 - 5 HP |
| Starter |
Capacitor |
| Voltage |
208-230V |
| Phases |
1 |
| Cycles |
60/AC/1HZ |
| Full Load |
14.5A/13A |
| Starting |
188/95A |
| Blade Shaft RPM |
3090 |
| Blade Capacity |
14" |
| Max Depth of Cut |
5" |
| Arbor Size |
1" |
| Blade Shaft Bearings |
Ball Bearings |
| Blade Shaft Drive |
2V-Belts |
|
Husqvarna / Target
14" Electric Masonry Brick and Block Saws
 |
Husqvarna Guardmatic ® 14" Masonry Saws
Dual capacitor increases power efficiency and reduces run amperage,
making it an ideal machine for low voltage conditions. Electric motors
operate on a run and start capacitor. Cutting head pivot on bearings
which are sealed and lubricated for life - no greasing required!
Bearings are seated in a machined saddle, on a heavy-duty support, for
precise alignment that lasts.
Cutting head height can be controlled with a convenient crank control
and foot pedal.
Rips=Capable of 8"x8"x16" in Block , Diagonal Cut=N/A in,
Depth of Cut 5".
Read more about Guardmatic |
Check-Out |
| Engine Manufacturer |
Baldor |
| Engine Spec |
T.E.F.C. |
| Horsepower |
3 - 7 HP |
| Starter |
Capacitor |
| Voltage |
208-230V |
| Phases |
1 |
| Cycles |
60/AC/1HZ |
| Full Load |
14.5A/13A |
| Starting |
188/95A |
| Blade Shaft RPM |
3090 |
| Blade Capacity |
20" |
| Max Depth of Cut |
5" |
| Arbor Size |
1" |
| Blade Shaft Bearings |
Ball Bearings |
| Blade Shaft Drive |
2V-Belts |
|
Husqvarna / Target
20" Electric Masonry Brick and Block Saws
|
|
Husqvarna Guardmatic ® 20" Masonry Saws
Dual capacitor increases power efficiency and reduces run amperage,
making it an ideal machine for low voltage conditions. Electric motors
operate on a run and start capacitor. Cutting head pivot on bearings
which are sealed and lubricated for life - no greasing required!
Bearings are seated in a machined saddle, on a heavy-duty support, for
precise alignment that lasts.
Cutting head height can be controlled with a convenient crank control
and foot pedal.
|
Check-Out |
|
