 |
|
|
|
|
|
|
Engine/Motor
|
| |
| |
Engine Manufacturer |
Baldor Electric Motor |
|
| |
Engine Spec |
T.E.F.C. |
|
| |
Max. Horsepower |
3HP, 5 HP Or 7-1/2HP |
|
| |
Starter |
Capacitor |
|
| |
Engine Coolant |
air |
|
| |
Voltage |
208230V |
|
| |
Cycles |
60/AC/1 Hz |
|
| |
Full Load |
21.5/20A |
|
| |
Starting |
149/139A |
|
| |
Transmission
Data
|
| |
| |
Wheels, front |
- mm / - inch |
|
| |
Conveyor Cart |
Cast aluminium. vulcanized rubber top. adjustble
measureing rule. 45/90deg cutting guide |
|
| |
Water Pump |
High output submersible. totally epoxy sealed with
builtin thermal overload protection |
|
| |
Chassis |
- |
|
| |
Weight, Crated |
162 kg / 361 lbs |
|
| |
Weight, Uncrated |
149 kg / 333 lbs |
|
| |
Blade
Data
|
| |
| |
Blade Guard Capacity |
356 mm / 14 inch |
|
| |
Blade Shaft RPM |
3090 |
|
| |
Max Depth of Cut |
127 mm / 5 inch |
|
| |
Arbor Size |
25.4 mm / 1 inch |
|
| |
Blade Shaft Bearings |
Ball bearings |
|
| |
Blade Guard Attachment |
One-piece steel. sta-Level |
|
| |
Features
|
| |
| |
|
|
| |
Dual capacitor
increases power efficiency and reduces run amperage,
making it an ideal machine for low voltage
conditions.
|
| |
Only two pivot
points for reduced saw maintenance and longer
diamond blade life.
|
| |
Cutting head
pivot on bearings which are sealed and lubricated
for life - no greasing required!
|
| |
Bearings are
seated in a machined saddle, on a heavy-duty
support, for precise alignment that lasts.
|
| |
Patended cutting
head allows easy removal of the power head for
transportation.
|
| |
On the cutting
head solid lockdown knobs are hand operated; no
tools are required.
|
| |
Bearing collar
folds down, entire cutting head assembly can be
lifted of easily.
|
| |
Spring tension
counter-balances the cutting head, making raising
and lowering easy.
|
| |
Cutting head
height can be controlled with a convenient crank
control and foot pedal.
|
| |
Open throat
design allows passage of large pieces of materials
to be cut.
|
|
|
| |
Large conveyor cart is a
durable, cast aluminum cart for strength and rigidity and is
16-5/8" long x 22-3/4" wide. The vulcanized rubber top is
permanently bonded to the cart and has a durable ruler for
quick, easy measurements. The included aluminum rip guide
assures straight cuts.
|
| |
Patented sta-levelฎ blade
guard keeps the blade guard parallel to the cutting table for
accurate cuts. The one-piece heavy-duty blade guard has a
built-in OSHA required "lip" for operator safety. The
ergonomically designed steel handle with molded grip bolts
securely into place. |
| |
Brass water tubes are built
into either side of the guard for long life and easy service. |
| |
Integrated water system easy
to clean and service. |
| |
Field installable blade shaft
assembly.
|
| |
Optional wheel-around kit for
added maneuverability around the job site.
|
| |
Electric water pump is
self-priming and thermally protected.
|
| |
Provides consistent water
delivery for maximum blade protection. |
| |
Blade shaft and bearings
provides extended life.
|
| |
Blade flanges are
precision-machined for secure clamping of the blade.
|
| |
Field installable blade shaft
assembly. |
| |
"X" braced steel frame
resists flexing.
|
|
| |
 |
|
|
|
|
|
|
Engine/Motor
|
| |
| |
Engine Manufacturer |
Baldor Electric Motor |
|
| |
Engine Spec |
T.E.F.C. |
|
| |
Max. Horsepower |
3HP, 5 HP Or 7-1/2HP |
|
| |
Starter |
Capacitor |
|
| |
Engine Coolant |
air |
|
| |
Voltage |
208230V |
|
| |
Cycles |
60/AC/1 Hz |
|
| |
Full Load |
21.5/20A |
|
| |
Starting |
149/139A |
|
| |
Transmission
Data
|
| |
| |
Wheels, front |
- mm / - inch |
|
| |
Conveyor Cart |
Cast aluminium. vulcanized rubber top. adjustble
measureing rule. 45/90deg cutting guide |
|
| |
Water Pump |
High output submersible. totally epoxy sealed with
builtin thermal overload protection |
|
| |
Chassis |
- |
|
| |
Weight, Crated |
162 kg / 361 lbs |
|
| |
Weight, Uncrated |
149 kg / 333 lbs |
|
| |
Blade
Data
|
| |
| |
Blade Guard Capacity |
356 mm / 14 inch |
|
| |
Blade Shaft RPM |
3090 |
|
| |
Max Depth of Cut |
127 mm / 5 inch |
|
| |
Arbor Size |
25.4 mm / 1 inch |
|
| |
Blade Shaft Bearings |
Ball bearings |
|
| |
Blade Guard Attachment |
One-piece steel. sta-Level |
|
| |
Features
|
| |
| |
|
|
| |
Dual capacitor
increases power efficiency and reduces run amperage,
making it an ideal machine for low voltage
conditions.
|
| |
Only two pivot
points for reduced saw maintenance and longer
diamond blade life.
|
| |
Cutting head
pivot on bearings which are sealed and lubricated
for life - no greasing required!
|
| |
Bearings are
seated in a machined saddle, on a heavy-duty
support, for precise alignment that lasts.
|
| |
Patended cutting
head allows easy removal of the power head for
transportation.
|
| |
On the cutting
head solid lockdown knobs are hand operated; no
tools are required.
|
| |
Bearing collar
folds down, entire cutting head assembly can be
lifted of easily.
|
| |
Spring tension
counter-balances the cutting head, making raising
and lowering easy.
|
| |
Cutting head
height can be controlled with a convenient crank
control and foot pedal.
|
| |
Open throat
design allows passage of large pieces of materials
to be cut.
|
|
|
| |
Large conveyor cart is a
durable, cast aluminum cart for strength and rigidity and is
16-5/8" long x 22-3/4" wide. The vulcanized rubber top is
permanently bonded to the cart and has a durable ruler for
quick, easy measurements. The included aluminum rip guide
assures straight cuts.
|
| |
Patented sta-levelฎ blade
guard keeps the blade guard parallel to the cutting table for
accurate cuts. The one-piece heavy-duty blade guard has a
built-in OSHA required "lip" for operator safety. The
ergonomically designed steel handle with molded grip bolts
securely into place. |
| |
Brass water tubes are built
into either side of the guard for long life and easy service. |
| |
Integrated water system easy
to clean and service. |
| |
Field installable blade shaft
assembly.
|
| |
Optional wheel-around kit for
added maneuverability around the job site.
|
| |
Electric water pump is
self-priming and thermally protected.
|
| |
Provides consistent water
delivery for maximum blade protection. |
| |
Blade shaft and bearings
provides extended life.
|
| |
Blade flanges are
precision-machined for secure clamping of the blade.
|
| |
Field installable blade shaft
assembly. |
| |
"X" braced steel frame
resists flexing.
|
|
|